ARDEX FEATHER FINISH is ideal for patching and smoothing minor surface damage to levelling and smoothing compounds i.e. footprints and trowel marks.
ARDEX FEATHER FINISH dries rapidly and provides a high bond to concrete,
- Floorcoverings can be installed after as little as 15 minutes
- True feather edge allows for greater coverage
- Cost effective - up to 50m² coverage per 11kg bag
- No priming required
plywood, cement/sand screeds, existing sub-floor smoothing compounds and
even existing ceramic tiles without the use of primers.
Use ARDEX FEATHER FINISH for patching, filling and feather finishing, daywork joints, ridges, gouges, depressions, uneven trowel marks, etc.,in the sub-floor, as well as smoothing joints between staggered plywood sheets.
ARDEX FEATHER FINISH is designed for use in commercial and domestic locations where the installation involves the use of resilient sheet or floorcoverings such as vinyl sheet or tiles, carpet etc.The cement/sand screed, plywood or ceramic tiled sub-floors must be dry, sound and clean, free of dust, grease and other barriers that might impair adhesion to the base. In domestic applications only, ARDEX FEATHER FINISH may be installed
over existing adhesive residues which are thin, sound and well bonded. The residues must not be affected by either the initial wetting from the applied mortar or the adhesive used to install the new floorcovering. ARDEX FEATHER FINISH is not recommended over adhesive
residues in commercial situations.